Help you analysis: the internal structure of soles for molding injection molding

Even help sole forming elastic body injection molding machines, injection of spindle right end is equipped with the frustum of a cone shaped connectors, expansion of the right end connected to the fixed locking nut, the left side is located in the frustum of a cone shape connecting head, center push rod front end is equipped with screw thread and its through through injection of main shaft and the center of the ellipse shape connecting head shaft hole connected to the fixed locking nut, injection head by locking and frustum of a cone shape connection head connection, center left side is equipped with spring reset mechanism of the push rod. Advantages: this product device with compact structure, easy fabrication, convenient dismantling and maintenance, and ensure the injection and injection of spindle head of coaxial degree requirements, so as to avoid the injection head contact with the inner wall of the mixing chamber.

Sole molding injection molding machine for large disc brakes, including the large disk, the disk of end face equipped with brake ring, two groups or more than two sets of brake institutions distribution under damping ring, brake institutions including brake, brake and braking cylinder assembly, braking block upper with brake piece, which comprised of braking tray support, its braking tray bottom connected to the piston rod end of the brake cylinder assembly. Advantages: this product is equipment braking effect is good, when braking, can ensure the stability of the disk, avoid the damage of the mechanical parts from the brake.

Sole molding injection molding machine for shoe last axis slewing mechanism including shoe last axis, turret and ram, shoe last shaft front with turret fixed by bolt connection, then end connected to the ram through bearing, described in the two groups of bearing between the shoe last axle shaft segment with the tooth, the two sides have rack and respectively with mesh rack, rack end is equipped with reciprocating power plant, the other end is equipped with buffer, and reciprocating power plant and buffer respectively connected to the ram. Advantages: this product is equipment is a cylinder or cylinder reciprocating motion of the piston rod distance limit, rack with reciprocating movement of the piston rod, the rack and shoe last axis on the shaft section of tooth mesh, thus shoe last output shaft rotation distance accurately, and is stable and reliable operation, long service life. Second is the ability to offset the sole mould on rapidly rotating inertia force produced by 180 degrees, avoid shoe last axial distortion due to inertia force action or rupture.