To introduce to you what is the sole molding injection molding machine for addit

Molding injection molding machine for polyurethane sole additive valves, including additive gas cylinder, additive needle seat, plus color cylinder cover, and color of the needle valve and spring, and additive valve parts products include additive needle valve core, valve core is located in the additive additive needle valve at the center of the hole, additive cylinder block right left end connected with the additive needle valve seat, the additive into the right end of the needle valve as the piston rod end additive within the center of the needle valve seat hole, additive left end of the needle valve as the piston and additive color the interior surface of cylinder block matching, and color on the left side of the needle valve is equipped with additive cylinder cover, additive cylinder head with additive gas cylinder body connection, additive between cylinder head and additive needle valve spring. Advantages: the utility model has compact structure, reliable operation, effectively avoid mixing chamber of molten state sole raw material into the injection color.

Even help sole molding injection molding machine including chassis and injection head, located in the injection head at the bottom of the casing wall on the level set a fixed plate, a fixed plate installed on the more material removal device; Excess stock removal device includes the cylinder, push the cylinder piston rod with horizontal push platform, promote the stents are installed on platform and vacuum pump, vacuum pump, respectively connected with the import and export into the tube and the tube, the tube inlet side of the opening up and located at the bottom of the injection head set, fixed on the inlet side, down to the bottom of the fixed plate installed with storage container, storage container and suction pump connected to the tube. Make the injection moulding machine downtime around when its export of injection head can still keep clean, avoid excess stock plug injection head exports, such already can quickly clean the injection head off around the remaining material will not make the remaining material no place to receive.